Difference between revisions of "Equipment"

From Holiday Controller
Jump to: navigation, search
(→‎Hardware)
(→‎Hardware: layout changes)
Line 160: Line 160:
 
===Hardware===
 
===Hardware===
 
{| cellpadding="15" cellspacing="0" border="1"
 
{| cellpadding="15" cellspacing="0" border="1"
 +
|+'''EtherDongle and Add on boards'''
 
|-
 
|-
 
|width="25%"|<center>'''Pixelnet EtherDongle'''</center>[[Image:ED25Finalrr.jpg|right|thumb|160px]]  
 
|width="25%"|<center>'''Pixelnet EtherDongle'''</center>[[Image:ED25Finalrr.jpg|right|thumb|160px]]  
Line 165: Line 166:
 
*[[Manual EtherDongle|Assembly Manual v1]]  
 
*[[Manual EtherDongle|Assembly Manual v1]]  
 
*[ Mouser Direct]
 
*[ Mouser Direct]
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7980 Pixelnet Firmware2]  
+
 
−
:'''Checksum'''
+
{| cellpadding = "2" cellspacing="0" boarder = "1"
−
:Pickit3 - xxxx
+
|-
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7979 Vixen v2.1 Plugin Pixelnet only]
+
|'''Device'''
−
<br>
+
|'''Firmware'''
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7397 DMX Firmware]  
+
|'''Checksum'''
−
::'''Checksum'''
+
|-
−
::Pickit3 - xxxx
+
|EtherDongle
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=6924 Vixen v2.1 Plugin if using DMX Firmware.]
+
|[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7980 Pixelnet ver2]  
 +
|Pickit3 = XXXX
 +
|-
 +
|EtherDongle
 +
|[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7397 DMX]
 +
|Pickit3 = XXXX
 +
 
 +
|-
 +
|Conductor
 +
|[ Pixelnet]  
 +
|Pickit3 = XXXX
 +
 
 +
|-
 +
|Conductor
 +
|[ DMX]
 +
|Pickit3 = XXXX
 +
|}
 +
 
 +
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=7979 Vixen v2.1 Plugin for Pixelnet firmware]
 +
*[http://diylightanimation.com/index.php?action=dlattach;topic=5765.0;attach=6924 Vixen v2.1 Plugin for DMX firmware]
 +
 
 +
 
 
'''NOTE:''' Only use the Pickit 3 utility and not MPLAB to program the firmware
 
'''NOTE:''' Only use the Pickit 3 utility and not MPLAB to program the firmware
 
<font color="red">'''NOTE: DON'T USE THE 49.9K RESISTORS FROM THE FIRST COOP, RJ IS GETTING REPLACEMENTS. THEY SHOULD BE 49.9 OHM'''</font>
 
<font color="red">'''NOTE: DON'T USE THE 49.9K RESISTORS FROM THE FIRST COOP, RJ IS GETTING REPLACEMENTS. THEY SHOULD BE 49.9 OHM'''</font>
Line 182: Line 204:
 
*[[Manual_Conductor|Assembly Manual]]  
 
*[[Manual_Conductor|Assembly Manual]]  
 
*[ Mouser Direct]
 
*[ Mouser Direct]
−
*[ Firmware]
 
−
:'''Checksum'''
 
−
:Pickit3 - xxxx
 
−
'''NOTE:''' Only use the Pickit (3) utility and not MPLAB to program the firmware
 
  
 +
 +
|width="25%"|<center>'''Lynx Trigger'''</center>
 +
<center>'''Conductor Input Board'''</center>[[Image:rr.jpg|right|thumb|160px]]
 +
*[[ConductorUse| Function & Use]]
 +
*[[Manual_Trigger|Assembly Manual]]
 +
*[ Mouser Direct]
 +
 +
 +
|width="25%"|<center>'''Lynx Slave'''</center>
 +
<center>'''EtherDongle Daughter Board'''</center>[[Image:rr.jpg|right|thumb|160px]]
 +
*[[ConductorUse| Function & Use]]
 +
*[[Manual_Slave|Assembly Manual]]
 +
*[ Mouser Direct]
 +
|}
 +
 +
<br>
 +
{| cellpadding="15" cellspacing="0" border="1"
 +
|+'''USB Dongle and Combiner'''
 +
|-
 
|width="25%"|<center>'''Pixelnet USB Dongle'''</center>[[Image:Lynx_DMX_Dongle_v2.0_-_Assembled.JPG|right|thumb|160px]]
 
|width="25%"|<center>'''Pixelnet USB Dongle'''</center>[[Image:Lynx_DMX_Dongle_v2.0_-_Assembled.JPG|right|thumb|160px]]
 
*[[USBPixelnetDongleUse| Function & Use]]
 
*[[USBPixelnetDongleUse| Function & Use]]
 
*[[Dongle_Manual_v2|Assembly Manual v2]]  
 
*[[Dongle_Manual_v2|Assembly Manual v2]]  
 
*[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=9eeb022092 Mouser Direct]
 
*[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=9eeb022092 Mouser Direct]
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6049 Firmware]  
+
 
 +
{| cellpadding = "2" cellspacing="2" boarder = "1"
 +
|-
 +
|rowspan="2"|'''Firmware'''
 +
|colspan="2" align="center"|'''Checksum'''
 +
|-
 +
|width="10%"|'''Pickit2'''
 +
|width="10%"|'''Pickit3'''
 +
 
 +
|-
 +
|[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6049 Standard]  
 +
|613B
 +
|613B
 +
 
 +
|}
 +
 
 
:<font size="2" color="red">NOTE: Not for use with DMX, See below for [[#DMX Devices|DMX firmware]] </font>
 
:<font size="2" color="red">NOTE: Not for use with DMX, See below for [[#DMX Devices|DMX firmware]] </font>
−
:'''Checksums'''
+
 
−
:Pickit2 - 613B
+
−
:Pickit3 - 613B
+
 
'''NOTE:''' Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
 
'''NOTE:''' Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
 
<br>
 
<br>
Line 202: Line 252:
 
*[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6342 '''Vixen ver 2.1 Pixelnet output plugin''']  
 
*[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6342 '''Vixen ver 2.1 Pixelnet output plugin''']  
 
*[http://diylightanimation.com/index.php?action=dlattach;topic=6727.0;attach=7247 '''Vixen ver 2.5 Pixelnet output plugin''']  
 
*[http://diylightanimation.com/index.php?action=dlattach;topic=6727.0;attach=7247 '''Vixen ver 2.5 Pixelnet output plugin''']  
 +
 +
|width="25%"|<center>'''Lynx Combiner'''</center>
 +
<center>'''can be use with Ether or USB Dongles'''</center>[[Image:IMG_4689.JPG|right|thumb|160px]]
 +
*[[CombinerUse| Function & Use]]
 +
*[[Manual_Combiner|Assembly Manual v1]]
 +
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=086313f476 Mouser Direct]
 
|
 
|
 +
|
 +
|}
 +
|-
 +
<br>
 +
{| cellpadding="15" cellspacing="0" border="1"
 +
|+'''Pixelnet Hubs'''
 
|-
 
|-
−
 
 
|width="25%"|<center>'''PixelNet 16 Port Active Hub'''</center>[[Image:Hub-Finished2.jpg|right|thumb|160px]]
 
|width="25%"|<center>'''PixelNet 16 Port Active Hub'''</center>[[Image:Hub-Finished2.jpg|right|thumb|160px]]
 
*[[ActiveHub16Use| Function & Use]]
 
*[[ActiveHub16Use| Function & Use]]
 
*[[Manual SSHub|Assembly Manual v1]]
 
*[[Manual SSHub|Assembly Manual v1]]
 
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=fe854712c6 Mouser Direct]
 
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=fe854712c6 Mouser Direct]
−
*[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6048 Firmware]  
+
 
−
:'''Checksums'''
+
{| cellpadding = "2" cellspacing="2" boarder = "1"
−
:Pickit2 - 811E
+
|-
−
:Pickit3 - 8196
+
|rowspan="2"|'''Firmware'''
 +
|colspan="2" align="center"|'''Checksum'''
 +
|-
 +
|width="10%"|'''Pickit2'''
 +
|width="10%"|'''Pickit3'''
 +
 
 +
|-
 +
|[http://diylightanimation.com/index.php?action=dlattach;topic=3554.0;attach=6048 Standard]  
 +
|811E
 +
|8196
 +
 
 +
|}
 +
 
 
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=2b85741d52 12v Option Kit]
 
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=2b85741d52 12v Option Kit]
 
'''NOTE:''' Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
 
'''NOTE:''' Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
Line 232: Line 305:
 
*[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=1fae9536c0  Mouser Direct]
 
*[http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=1fae9536c0  Mouser Direct]
 
|
 
|
 +
|}
 +
 +
<br>
 +
{| cellpadding="15" cellspacing="0" border="1"
 +
|+'''Pixelnet Controllers Smart and Dumb'''
 
|-
 
|-
 
|width="25%"|<center>'''Smart String Controller'''</center>[[Image:SSC-Finished.jpg|right|thumb|160px]]
 
|width="25%"|<center>'''Smart String Controller'''</center>[[Image:SSC-Finished.jpg|right|thumb|160px]]
Line 351: Line 429:
 
Flash you SSC with the new firmware. The same firmware now works on both controller versions.  
 
Flash you SSC with the new firmware. The same firmware now works on both controller versions.  
  
−
|width="25%"|<center>'''Lynx Combiner'''</center>[[Image:IMG_4689.JPG|right|thumb|160px]]
+
|
−
*[[CombinerUse| Function & Use]]
+
−
*[[Manual_Combiner|Assembly Manual v1]]
+
−
*[http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=086313f476 Mouser Direct]
+
  
 
|}
 
|}

Revision as of 21:12, 23 September 2012

Diy Light Animation Equipment
This page contains links and info about the DLA equipment with all current hardware is based off of the Pixelnet and DMX standard.

Smart String / Pixelnet Section

Nodes(Lights) Info & Order Chart

SS Lights Info Chart and Ordering Links
Light type Input Side Max # per SSC
based on current draw
Approx Amps
per Max Nodes
Links to purchase online
Approx. Length (It can be shorter or longer)
Smart String Nodes
Red +, Green - , Blue Data
Big Chip Side of Node
128
 3.7975
29ma each
25ct String
5-7 ft
50ct String
12-14 ft
75ct String
19-21 ft
100ct String
26-28 ft
128ct String
33-35 ft
(Metal Backed) 3 50/50 Nodes
Red +, Blue - , Green Data
DI
120
 3.96
33ma each
Square
(Plastic rectangle) 50/50 Nodes
Red +, Blue - , Green Data
DI
80
 4.16
52ma each
Rectangle (Center Spacing 4.7", Wire between each 3.9", Total 7.8')
Rigid strips 30 50/50 Nodes
Red +, Blue - , Green Data
Male 3 pin connector
4
 Not Known Yet Rigid
Flexible strips 13ft 50/50 nodes
Red +, Blue - , Green Data
Arrows show direction
1 (120 nodes each)
 approx 3.96
33ma each
Flexible
Accessories → 3 Conductor Cable 3 Conductor Connectors

Chart Wire Color Changes

Cat5e Cable


String Controller Pipe Size Chart

Device Pipe Cap Purchase Info
Pixelnet Smart String Controller (SSC) 1 inch 200 PSI PVC / Sch 20 Also, 1inch PVC Sch 40 CAP
  • Hole sizes 15/64 for 3 wire connectors &
7/32 for the pigtails
  • Lowes - Pipe
1" PVC Pipe 10ft
  • Lowes - CAP (2 per controller)
1" PVC Cap
Pixelnet Dumb String Controller (DSC) 200 PSI PVC / Sch 20

Library

Documents


Videos
Software
(Put this file in the /plugin/output folder) Updated 7-10-2011
Academy info - pdfs, links and more
Diagrams
Smart Strings1.jpg
Smart Strings2.jpg
SmartString1f.jpg
Newpixdims.jpg

Hardware

EtherDongle and Add on boards
Pixelnet EtherDongle
ED25Finalrr.jpg
Device Firmware Checksum
EtherDongle Pixelnet ver2 Pickit3 = XXXX
EtherDongle DMX Pickit3 = XXXX
Conductor [ Pixelnet] Pickit3 = XXXX
Conductor [ DMX] Pickit3 = XXXX


NOTE: Only use the Pickit 3 utility and not MPLAB to program the firmware NOTE: DON'T USE THE 49.9K RESISTORS FROM THE FIRST COOP, RJ IS GETTING REPLACEMENTS. THEY SHOULD BE 49.9 OHM

Lynx Conductor
EtherDongle Daughter Board
File:Rr.jpg
160px
Lynx Trigger
Conductor Input Board
File:Rr.jpg
160px
Lynx Slave
EtherDongle Daughter Board
File:Rr.jpg
160px


USB Dongle and Combiner
Pixelnet USB Dongle
Lynx DMX Dongle v2.0 - Assembled.JPG
Firmware Checksum
Pickit2 Pickit3
Standard 613B 613B
NOTE: Not for use with DMX, See below for DMX firmware

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Put one of the files below in the Vixen /plugin/output folder

Lynx Combiner
can be use with Ether or USB Dongles
IMG 4689.JPG

|-

Pixelnet Hubs
PixelNet 16 Port Active Hub
Hub-Finished2.jpg
Firmware Checksum
Pickit2 Pickit3
Standard 811E 8196

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
NOTE: POWER CONNECTORS: ALWAYS use the (3) 4 pin power connectors with the 24 pin connector

Failure to add the extra power connectors can/will damaged the PS 24 pin Connector and Hub from excess current
Pixelnet 16 Port Passive Hub
Sm-Hub-Finish.jpg


NOTE: POWER CONNECTORS: ALWAYS use the (3) 4 pin power connectors with the 24 pin connector

Failure to add the extra power connectors can/will damaged the PS 24 pin Connector and Hub from excess current
Pixelnet 4 Port Passive Hub
Port4.JPG


Pixelnet Controllers Smart and Dumb
Smart String Controller
SSC-Finished.jpg
Firmware Checksum
Pickit2 Pickit3
Standard 7-10-2011 E2EB E363
Test 2EF2 2F6A

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
To configure SSC SS Utility

Smart String Controller V2
Sm-nSSC-Finish.jpg
Firmware Checksum
Pickit2 Pickit3
Standard 19F3 1A6B

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
To configure SSC SS Utility

Smart String Controller V3
File:Rr.jpg
160px
Firmware Checksum
Pickit2 Pickit3
Standard 25E1 2659
Test B311 B389

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
To configure SSC SS Utility

The updated EXE file for the utility. Just find your folder that your SSC utility is in and replace the old one with this new file. When you run it then you should see the additional choice for grouping on the utility.

Dumb String Controller
DSC beta 160.JPG
Firmware Checksum
Pickit2 Pickit3
[ Standard] xxxx xxxx

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

V3 firmware can also be used on V1 & V2 SSC controllers with the following modification

On the following image you will see two colored in lines I painted on to a image of the top of a SSC. This mod was designed to be totally on the top of the PCB to allow those with their SSCs already enclosed in the PVC to do this easily. Just slide the PCB up out of the PVC as if you were going to update the firmware, which you are going to do also.

SSC-Mod.jpg

It does not matter if it is a V1 or V2 PCB this mod is exactly the same.

The red mark is where you need to use a razor blade and cut the trace where it is. This is on the TOP of the PCB where the parts are. You will find the heavier trace located between the pins of the two resistors. Make sure you cut it well enough that it does not make connection any longer.

Then on the back of the PCB place a jumper wire where the Green line is drawn. Connect these points with a small light wire making sure it does not short anything else. Remember to take into account that when you flip the pcb over to do this that every is mirror imaged on you. Once this is complete you may want to change the top resistor to in the range of 220 - 330 ohms. It will work with others that we have used but you will find this to be the best area to use.

Flash you SSC with the new firmware. The same firmware now works on both controller versions.

DMX Section

Hooking up a DMX Universe

  • Hookup Diagrams showing DMX devices connected to a computer.

Equipment Errata

  • This page is for mods needed on released production boards from DLA.

Controller (Dimmers) Comparison Table

Controller DMX # Channels On Board SSR Wireless Pkg LNT Dimming On Board Splitter 12v DC 120v AC 240 AC
Lynx Express Yes 16 Yes EX/RX or RX Yes Yes Yes (1)** No Yes Yes
Lynx Freestyle Yes 128 No/SSR4 EX/RX wMod or RX No Yes No No Yes Yes
Lynx SSR4-DMX Yes 4 Yes EX/RX wMod or RX No Yes No No Yes No
Lynx MR-16 Yes 16 LED/MR16 EX/RX wMod or RX No Yes No Yes *** No No
Legend
  • LNT = Light Normalizing Technology. With the proper curves all lights turn on and dim at the same rate.
  • Need to know if Lynx hardware works in your region? Lynx Voltage Info
Asterisk Notes
** Two DMX outputs using wired input (Cat5) with ver 3 pcb and higher or
One DMX output (DMX Out2) if using the mounted EX/RX wireless module on ver 3 pcb and higher
*** MR16 is capable of handling up to 24 volt DC source power. Please place a heat sink on the 5 volt regulator.

Cases Chart

Lynx Device Case Part# Info Purchase Info
  • Express
  • Freestyle
CG-1500 Coax Demarcation Enclosure
12.25 X 12 X 5.25
Note: As of 8/2011, the manufacturer has changed the locations of the mounting bosses in the case. You may need to make an adapter plate or use alternate means of attaching your board to the case.
  • Cable Amplifiers
CG-1500
  • DF Countryman
Call 612-724-4400 to Order
Sales Manager Duke McNaughton
  • DIYLEDEXPRESS
CG-1500
  • Excess Supply
CG-1500
  • Radiant Holidays
New Style CG-1500
  • MR-16

16 Channel DC Controller

CG-500 Coax Demarcation Enclosure
6.3 X 7.8 X 2
  • DIYLEDEXPRESS
CG-500
  • Radiant Holidays
CG-500
  • SSR4
  • Splitter
  • PixelNet 4 Port Passive Hub
TA-200 Coax Demarcation Enclosure
3.75 x 3 x 1.5
  • DF Countryman
Call 612-724-4400 to Order
Sales Manager Duke McNaughton
  • DIYLEDEXPRESS
TA-200
  • Excess Supply
TA-200
  • Radiant Holidays
TA-200
  • USB Dongle V1
  • USB Dongle V2
  • Wireless TX V1
  • Wireless TX/RX V2
LP-35P Choose Gray and put in the comments of the order
"Make Sure it has the PCB bosses"
No Studs
  • Polycase
LP-35

If you call they will ship USPS at a much cheaper rate than UPS

  • Wireless RX V1
LP-51P Choose Gray and put in the comments of the order
"Make Sure it has the PCB bosses"
No Studs
  • Polycase
LP-51

If you call they will ship USPS at a much cheaper rate than UPS

Flood Light - Aether

DMX LED RGBW Flood/Spot Light

Pronunciation on Aether:

Ether \E"ther\ ([=e]"th[~e]r), n. [L. aether, Gr. a'iqh`r, fr. a'i`qein to light up, kindle, burn, blaze; akin to Skr. idh,
indh, and prob. to E. idle: cf. F. ['e]ther.] [Written also [ae]ther.]
Lynx Aether
4 Channel Light
Checksums
Pickit2 - A6F9
Pickit3 - A771

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware


Lynx Aether II
4 Channel Light
15 deg
22 deg
32 deg
Checksums
Pickit2 - 84D5
Pickit3 - 854D

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

  • Program Start Address with Lynx Address Utility
  • Power - 12 AC Outdoor Accent Light Transformer - Estimate 35 watts per Aether 2
Example Homedepot Transformer

Dimmers

Dimmer Info - Manual, Mouser Direct BOM (Bill Of Materials), Firmware and Checksum
Lynx Express
16 Channel
Checksums
Pickit2 - 64C0
Pickit3 - 6538

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Lynx Freestyle
128 Channel Controller only
Checksums
Pickit2 - 9AAF
Pickit3 - 9AAF

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

16 CH DC Controller (MR16)
16 Channel LED
Checksums
Pickit2 - 90D4
Pickit3 - 90D4

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware


SSR4
4 Channel SSR plus DMX option
Checksums
Pickit2 - 9408
Pickit3 - 9408

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

DMX Wireless Devices

Wireless(TX/RX)Ver 2
Wireless TXRX v2.0 - Assembled.JPG
Checksums
Pickit2 - 1AED
Pickit3 - 1B65

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware
NOTE 2: Its recommended to use 50ms for Wireless. YMMV

Express Receiver (EX/RX)Ver 2
EX RX V2.JPG
Checksums
Pickit2 - 1AED
Pickit3 - 1B65

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

DMX Devices

DMX Lynx USB Dongle
Lynx DMX Dongle v2.0 - Assembled.JPG
Checksums
Pickit2 - 0A6F
Pickit3 - 0A6F

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

NOTE: Pixelnet firmware, See above for Lynx USB Dongle / Pixelnet|USB Dongle Pixelnet firmware
Splitter
SmSplitterv3.jpg
Bobcat DMX Tester
DMXTester.jpg
Bobcat DMX Servo Controller
ServoController.jpg

Aeon Clock

Aeon
Clock
Checksums
Pickit2 - 24EE
Pickit3 - 23C1

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Discontinued Hardware

Lynx
16 Channel

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Transmitter (TX) Ver 1
Tx.jpg
Checksums
Pickit2 - xxxx
Pickit3 - 475E

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Express Receiver (EX/RX)Ver 1
Exrx.jpg
Checksums
Pickit2 - xxxx
Pickit3 - 5EEA

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Standalone Receiver (RX)Ver 1
Lynx Receiver.JPG
Checksums
Pickit2 - xxxx
Pickit3 - 5EEA

NOTE: Only use the Pickit (2 or 3) utility and not MPLAB to program the firmware

Retrieved from "https://www.holidaycontrollers.com/wiki/index.php?title=Equipment&oldid=3902"