RickTest
From Holiday Controller
Controller Voltage to Lynx Hardware
| Device | 120 volts - | 240 volts - | 12 volts DC - | Low volts (24/36) |
| Lynx Express | Yes | Yes (1) | No | No |
| Freestyle | Yes | Yes (1) | No | |
| SSR4 | Yes | Yes (1) | No | Yes (3) |
| SSR4-DMX | Yes | Yes (1,4) | No | No |
| Lynx Splitter | Yes | Yes (1) | No | No |
| Lynx MR-16 | No | No | Yes | No |
1 - Normally different transformer and resistor are needed. 2 - Cut traces for the output section - Note Input Voltage has to be either 120v or 240v 3 - SSR4 can control low voltage lights while connected to the Freestyle. 4 - Currently the DMX option on the SSR4 can be used with 240v volts but the firmware doesn't work with 50 hz. Should be fixed later this year.
Supply On Voltage Chart to Lights or Light Strings
| Device | 120 volts - | 240 volts - | 12 volts DC - | Low volts (24/36) |
| Lynx Express | Yes | Yes (1) | No | No |
| Freestyle | Yes | Yes (1) | No | |
| SSR4 | Yes | Yes (1) | No | Yes (3) |
| SSR4-DMX | Yes | Yes (1,4) | No | No |
| Lynx Splitter | Yes | Yes (1) | No | No |
| Lynx MR-16 | No | No | Yes | No |
1 - Normally different transformer and resistor are needed. 2 - Cut traces for the output section - Note Input Voltage has to be either 120v or 240v 3 - SSR4 can control low voltage lights while connected to the Freestyle. 4 - Currently the DMX option on the SSR4 can be used with 240v volts but the firmware doesn't work with 50 hz. Should be fixed later this year.
