Difference between revisions of "Equipment Errata"
From Holiday Controller
KeithTarpley (Talk | contribs) |
(→Splitter) |
||
| Line 19: | Line 19: | ||
* Missing trace for channel 4 | * Missing trace for channel 4 | ||
* Add wire jumper as shown in the picture below | * Add wire jumper as shown in the picture below | ||
| + | [[Media:test.zip]] | ||
Revision as of 22:48, 14 January 2009
This page is for mods need on released production boards from DLA. Normally the mods are only needed for ver 1.0 of the boards. If you don't see a board listed here then most likely there is none needed.
Freestyle
- First run pcbs marked ver 1.0
- Missing trace for channel 49
- Add wire jumper as shown in the picture below
SSR4
- First run pcbs marked ver 1.0
- Only need for SSR4 with DMX option on it.
- RJ-45 trace issues.
- Cut the 4 traces as shown in the pictures below
Splitter
- First run pcbs marked ver 1.0
- Missing trace for channel 4
- Add wire jumper as shown in the picture below
